We have worked for Garden Field School for many years now and have just finished the latest fencing project for them.
JOB 1
which involved supplying & installing a 1.3 high picket gate 1.55 wide hung between a 100mm x 100mm x 1.5 post bolted to a brick wall and a 2.1mt x 100mm x 100mm post concreted in
Job 2
Supply & install a 1mt high round top picket fence and gate comprising of a double gate 3.6mt wide & a single gate 1.8mt wide and approx 5.4mts of fencing
We Supplied & installed new tongued & grooved panels around all 3 sides of front garden 2ft6in high set on 6in high concrete gravel boards, supported by slotted concrete posts, plus also a new wrought iron gate
, & removed old fencing from site.
In the rear garden down the left had side,we supplied & installed 2 x 5ft high & 13 x 5ft6in high tongued & grooved panels all set on concrete gravel boards supported by slotted concrete posts.
We have just finished another job in Stevenage using 5ft6in high closeboard panels set on 6in high concrete gravel boards
, supported by slotted concrete posts.
We supplied and installed new saxon ralings 
to front garden of this property.
We recently removed an old wooden shed and replaced it with a new 10ft x 8ft metal shed on an existing concrete base.
We supplied and installed a be-spoke Walkern gate
in Stevenage.
We supplied and installed a 8ft x 6ft Pent shed, plus 6.5mts of 6ft high lapped panels supported by 3in x 3in timber posts and 10mts of 3ft high round top picket fencing, we also 
laid customers own paving slabs to form a pathway down the side of his house.
Often we can save our customers money by repairing fencing rather than replacing them, on this occasion we were able to reuse the existing concrete posts using arris rail repair brackets, and then replace the timber arris rails and gravel boards plus also the featheredge boards too.
We also supplied and installed 4 x 5ft6in high closeboard panels set on 6in high concrete gravel boards supported by slotted concrete postst with a 1ft high trellis on top.
We supplied and installed a 3mt wide raised helve field gate
and pedestrian field gate too between existing brick pillars to front drive.
We supplied and installed 106mt’s of 1.8mt high Closeboard fencing constructed with 1.65mt high vertical overlapping featheredge boards clad to 3 x horizontal timber arris rails set on a .150mm horizontal timber gravel boards, supported by 100mm x 100mm mortised timber posts at 3mt centres also fitting a .300mm trellis
on top of fence.
