Category: Installation Examples

We removed a brick wall and existing fence from site and then supplied and installed 5 x 5ft high pre made closeboard panels set on 12in concrete gravel boards, plus 4 x 3ft6in high pre made closeboard panels set on 6in high concrete gravel boards with 2ft high trellis on top all supported by slotted concrete posts.

We had to realign an existing fenceto get back to original boundary position,which was being impeded by a tree stump, the old timber post was set in a met post which the tree & roots had grown around post over a long period of time, so we had to chop out the stump to get to the old met post, and then supply and install a new timber post.

We cleared foliage and removed an old fence and then supplied and installed 20mts of new 1.8mt high closeboardbuilt in situ fencing at a property in Knebworth across end of rear garden, constructed with 1.65mt high vertical over lapping featheredge boards, clad to 3 x horizontal timber rails, seton .150mm horizontal timber gravel boards, supported by 100mm x 100mm timber posts at 1.8mt centres. We had to use extra long posts in certain areas to allow for drops in the ground contours, see before and after images.

We have just carried out a job for Court Homes in Hitchin

We supplied and installed 20 x 5ft high closeboard  panels  set on double and single 12in concrete gravel boards, supported by slotted concrete posts.

We replaced existing fencing with 14 metres of new 3ft high flat top picket fencing, constructed with 3ft high vertical palings, clad to 2 x horizontal timber arris rails, supported by 4in x 4in timber mortised posts, plus fitting a new framed ledged and braced picket gate fully furnished.